Los Angeles Plumbing Services
24/7 Emergency Plumber Los Angeles.

technologyTag Archives

Is there a need to replace a Building Trap?

The City’s old houses are cozy or large, but they can be a nightmare for plumbers in Los Angeles. The old-fashioned fixtures and fittings are often very old and have lasted well beyond their intended life cycles.  Modern building codes require plumbers in Los Angeles to implement certain standards, and houses that still contain the original water pipes and drains cause headaches for many homeowners. Building trap replacement is one of the essential tasks for the owners of these homes, because the existence of traps is a major problem.

What is a Building Trap and  Why You Need to Remove It!

The building trap is a U-bend clay pipe that builders would install on the exterior sewer line of houses built before the use of modern plumbing fittings. The purpose of the trap was to stop odorous gases entering the home from the sewer, and it worked by “trapping” a small amount of water in the bend – just like the S-bend under your kitchen sink does. You can check whether your home has a building trap by searching in your front garden for a cast iron “cap” in the shape of a mushroom. It’s usually located on a pipe close to the surface.

Building traps cause a range of plumbing problems for Los Angeles homeowners, such as

  • Blocked drains, caused by the accumulation of waste in the bends of the trap. Because the trap essential consists of two 90-degree elbows, it’s not possible to clear it with modern plumbing equipment.
  • Sewer leaks, caused by cracks in the clay pipe that the U-bend is made from. This allows sewer water to leach out into the surrounding soil, creating a breeding ground for bacteria and odors.
  • Root infestation, which happens when tree roots detect the presence of water within the clay pipe and penetrate to access it. This causes a catchment area for loose debris, which eventually clogs the entire drain.

Modern building codes prohibit the use of building traps, which are no longer available. This means that any renovation of your Los Angeles home needs to include a building trap replacement.

Replacing the Trap

If you find your property has a building trap, check to see whether it’s inside or outside your foundations. Exterior building traps are typically removed by excavating near to the foundation, which is usually fairly simple. Interior traps, however, require lifting of the basement floor. When plumbers in Los Angeles remove building traps, they typically replace them with two-way cleanout that provides access to both directions of the drain. If necessary, they also install a backflow prevention valve to help prevent the sewer from backing up into the home.

If your home is built prior to 1970, contact your local plumber and get an assessment of whether you have a building trap that needs replacement. It costs much less to replace it before you experience problems than it will when you have extensive damages to repair and clean-up costs to add to the process.

Hiring a Plumber In Los Angeles

While Los Angelesians are busy enjoying what has so far been a mild winter, many homeowners are planning home renovations in spring. If you’re in this category, you’ll probably need to start sourcing contractors soon for the various aspects of your project, and a qualified plumber is an important one. Hiring a plumber in Los Angeles is fortunately not too difficult, as long as you follow few basic guidelines to make sure you find the right person for the job.

Find a Service Specialist

No matter how good a local Los Angeles plumber is at clearing drains, that’s not going to help you when you need someone to install new kitchen plumbing. As with any other industry, hiring a plumber in Los Angeles depends on finding a contractor with specific experience in the work you want to be done. Using a specialist might cost slightly more than simply hiring the local handyman, but chances are you’ll get a much better quality of work as well.

Where to Start

Begin by searching online for plumbers in your area of  Los Angeles. The GTA is pretty big, and many only work in certain parts of town. Search specifically for those who offer residential plumbing options such as water service installations and drain installations, because this experience is vital to ensure quality work during a renovation. Once you find a list of potential plumbers, you can call them all for quotes on the work you want done.

Check References

It’s not enough to simply go by written testimonials on a plumbing website, because these can easily be created by anyone. When hiring a plumber in Los Angeles for an important project, you need the reassurance that comes with knowing you’ve done your homework before making a selection. It’s essential to verify that the plumber you choose has the skills and experience you need, as well as to find out whether the company is reliable and trustworthy in terms of getting the job done.

Comparing Prices

Plumbers come in all shapes and sizes and so do their prices. It isn’t always easy to compare the prices offered by one contractor with another, because they could use different methods to estimate. When you’re hiring a plumber in Los Angeles, you might find one company quotes separately for labor and parts while another provides an all-inclusive proposal. Some plumbers may prefer you to purchase your choice of fittings, but others believe this part of the job should be left to professionals. Go through every quotation you receive carefully and make sure you understand exactly what is included in each. And remember, cheap isn’t always the best choice!

Avoid DIY Plumbing

Unless you really know what you’re doing, avoid choosing DIY plumbing projects over professional renovations. This is particularly relevant when it comes to skilled trades such as plumbing and electrical, which can have serious repercussions if they are not done correctly. Not only can you end up with a half-finished project because you got too busy halfway, but you could incur huge repair costs that aren’t covered by your insurance. This usually applies to repairs to water damage, particularly if the job was not done by a qualified professional.

There really aren’t any “short cuts” to having your plumbing projects well executed. Hiring a plumber in Los Angeles remains the best and fastest way to get quality work done, and provided you do due diligence it’s also the most cost-effective way. Contact your local plumber 911 Plumbing Services for an estimate on your spring Los Angeles project now – before the season takes off and everyone is busy.

Water-Efficient Showerheads

Water-Efficient Shower heads

In these days it is very important and crucial how we use water. As all resources are scarce, the same applies to the water that we use every day for many different purposes. 911 Plumbing Services recommends to minimize the water usage by using  water-saving shower heads which typically range from 1.5 gpm to 2.0 gpm and that  itself represents a 20% or greater water savings.

The Water-Efficient Showerhead by Delta® uses proprietary H2Okinetic Technology® to operate at 1.5 gpm, which delivers 40% less water than a standard showerhead, while providing a satisfying shower experience. It has won numerous awards, including a 2007 Stevie Award, a 2007 silver ADEX award and a 2007 Most Valuable Product (MVP) Award from Building Products magazine. Here, at 911Plumbing Services we are ready to take over your problems and give them an optimal solution. Feel free to give us a call at: 888-959-1911

Dual Flush Toilets

There has been many studies in regards to the Dual flush toilets and whether they do really save water. Dual flush toilets are exactly what they claim to be: toilets that gives the option to choose from two different flushes. First flush has a low volume followed by the second flush with a high volume. These two separate flushes with different volumes help to get rid of the packing more efficiently.

By acquiring a toilet with both a low and high volume flushes, you’ll be able to cut the water your toilet uses by more than half , which will not only save you some  money over the course of the toilet’s lifetime, but it will do some good to the environment.

How Much Difference Can Two Separate Flushes Make?
The answer to this question is impressing. Few studies of dual flush toilets show that using a dual flush system as opposed to a conventional one can reduce water consumption by up to 67%. In fact, the water savings are so substantial that several nations, such as Australia, have passed laws requiring that all new toilets installed are of this variety.

Growing Industry
The double flush idea is relatively new technology to start with (these toilets first hit the international market little more than a decade ago) and recently they are invading into the United States and the rest of North America.  However, a growing concern about the state of our environment, coupled with the widespread occurrences of drought that have plagued many areas of the United States, have prompted a slew of companies to dive into the business, making these pioneering toilets fairly easy to track down for the wise homeowner looking to save money and natural resources.