Los Angeles Plumbing Services
24/7 Emergency Plumber Los Angeles.

PlumbingTag Archives

What if you can Do it Yourself!

Every homeowner experiences a clogged drain at some point, and it’s usually at the least convenient time. Whether it’s your kitchen sink, bathroom basin or the guest shower, you’ll need to address it as soon as possible. The first step is to determine whether you need a professional to come in and do plumbing repairs in Los Angeles or if you can resolve the problem yourself.

Use an Auger

If the plunger doesn’t work, you’re moving on to step 2. Homeowners who are fairly handy with plumbing tools can try using a cable auger next. To do so, you’ll need to get down under the clogged drain pipe and remove the sink using a pipe wrench. Tip any water and dirt from the trap out into a bucket and check the trap itself to see if that’s where the problem is. If it’s clear, push the cable auger into the section of drain pipe in the wall until it touches debris.

Try a Plunger

That trusty tool of every homeowner and plumber, the plunger is the first thing you should try. Fill the sink part of the way with water to create a vacuum, then position the plunger over the outlet and work it up and down rapidly. If you have a double sink, you’ll need to block the drain outlet for the other side tightly with a wet rag to prevent the blockage bubbling back up. The same applies in a bathroom tub or sink, where you need to plug the overflow outlet before attempting to clean the drain using a plunger.

Use Drain Cleaner

For those who aren’t in possession of an auger, you can try commercial drain cleaner to clear your clogged drain before calling a plumber. These products usually contain a form of acid and can be dangerous if you get them on your person. If you’re going to try this, clear the surrounding area of any people and pets, then follow the instructions for the particular product you’ve purchased.

Typically, you pour the substance into the drain while taking care not to inhale the fumes. Leave it to seep through the mass for 30 to 60 minutes, and it’s a good idea to close the door while you do so because it has a fairly unpleasant odor.  The advantage of this method is that it helps to clear the drain of bacterial pollutants at the same time, which can be a risk to your health.

 

Flush with Water

Regardless of the method you use to clear a clogged drain, it’s useful to follow it with rapidly boiling water poured into the drain. Send several buckets of water down as long as it’s flowing, to flush out any debris that might be left behind. If you made use of any products containing acid, watch out for splash backs and fumes that might be harmful to you or your family.

 

If you have any doubts about your ability to perform these tasks, it’s best to call your local Los Angeles  plumber to deal with the clogged drain.

www.911plumbingservice.com

Is there a need to replace a Building Trap?

The City’s old houses are cozy or large, but they can be a nightmare for plumbers in Los Angeles. The old-fashioned fixtures and fittings are often very old and have lasted well beyond their intended life cycles.  Modern building codes require plumbers in Los Angeles to implement certain standards, and houses that still contain the original water pipes and drains cause headaches for many homeowners. Building trap replacement is one of the essential tasks for the owners of these homes, because the existence of traps is a major problem.

What is a Building Trap and  Why You Need to Remove It!

The building trap is a U-bend clay pipe that builders would install on the exterior sewer line of houses built before the use of modern plumbing fittings. The purpose of the trap was to stop odorous gases entering the home from the sewer, and it worked by “trapping” a small amount of water in the bend – just like the S-bend under your kitchen sink does. You can check whether your home has a building trap by searching in your front garden for a cast iron “cap” in the shape of a mushroom. It’s usually located on a pipe close to the surface.

Building traps cause a range of plumbing problems for Los Angeles homeowners, such as

  • Blocked drains, caused by the accumulation of waste in the bends of the trap. Because the trap essential consists of two 90-degree elbows, it’s not possible to clear it with modern plumbing equipment.
  • Sewer leaks, caused by cracks in the clay pipe that the U-bend is made from. This allows sewer water to leach out into the surrounding soil, creating a breeding ground for bacteria and odors.
  • Root infestation, which happens when tree roots detect the presence of water within the clay pipe and penetrate to access it. This causes a catchment area for loose debris, which eventually clogs the entire drain.

Modern building codes prohibit the use of building traps, which are no longer available. This means that any renovation of your Los Angeles home needs to include a building trap replacement.

Replacing the Trap

If you find your property has a building trap, check to see whether it’s inside or outside your foundations. Exterior building traps are typically removed by excavating near to the foundation, which is usually fairly simple. Interior traps, however, require lifting of the basement floor. When plumbers in Los Angeles remove building traps, they typically replace them with two-way cleanout that provides access to both directions of the drain. If necessary, they also install a backflow prevention valve to help prevent the sewer from backing up into the home.

If your home is built prior to 1970, contact your local plumber and get an assessment of whether you have a building trap that needs replacement. It costs much less to replace it before you experience problems than it will when you have extensive damages to repair and clean-up costs to add to the process.

Internal Resource

Searching for a plumber in Los Angeles, Ca? If you require a plumber in Los Angeles, Or want the best Los Angeles Plumbers, give us a call! We are Los Angeles finest plumbing service.If you are looking for a talented plumber, give us a call! Did the city or your insurance company require you to get an automatic earthquake gas shut off valve in Los Angeles?  We offer tankless water heater repair and installation. Have you had a drain stoppage, or just a slow drain, we can snake or hydro-jet your drain. Is dirty water clogging up your sink? Is that leaking toilet not draining right?  We can repair your garbage disposer, replace those old rusty pipes under your sink, and with electronic leak location, we can detect that slab leak. Do you have a faucet that drips and needs a repair? Is That sprinkler valve leaking? How about a glamour new shower valve? We can install pipes, replace clean outs, swap out sump pumps, and even locate gas leaks, call us for any plumbing need 888-959-1911. We can also install a LADWP Sub-meter for you to lower your water bill.

Why Tankless Water Heaters Are More Energy Efficient


 

Have you ever opened you electric bill and thought that you were paying way too much? I would bet the answer to that question is a resounding “yes!” Did you know that a significant portion of your monthly utility bill is directly attributable to your water heater? If you are one of the millions of people that are still using tank design water heaters, you are wasting money every month. But this doesn’t have to be the case. There are better alternatives on the market and, in this case, the better option is a tankless water heating system.

Now before we look at why tankless water heaters are more efficient, you have to realize that tank water heaters are actually very good at providing the hot water that is needed in most homes. They are also very reliable with a life span of 10 years or more. But they were originally designed almost 100 years ago. Much progress has been made to improve the efficiency of the design but the design is fundamentally flawed.

The flaw in the design relates to how the water that enters the tank is processed and heated prior to use in your home. The water supply will fill the tank and then the heating takes place. But if the water is not used quickly enough, then it will slowly begin to cool and require reheating prior to being used. This heating and reheating cycle is repeated again and again and again until the contents of the tank are used and then it starts all over with the new contents of the tank that replaces the water that was just used.

The answer to this flaw is a design that can heat the water on demand and only heat the water that is being used. That is the design of tankless water heating systems. It has been estimated that a tankless water heating system will lower the water heating portion of your utility bill by half. That is some significant savings!

As an added bonus, tankless systems are very small compared to tank units. You will save a lot of space by replacing a tank based water heater with a tankless model. These ultra compact units are usually mounted on a wall and are about the size of a medicine cabinet.

That having been said, we live in a world where energy efficiency is a necessity and you have to be very careful about how much energy you are using and wasting. So, while not for everyone given the cost constraints, buying water heaters that will save energy will not only help you lower your expenses every month but also the environment at the same time. If you have any questions about tankless water heaters, give 911 Plumbing Services, Inc. a call: 888-959-1911.

Water-Efficient Showerheads

Water-Efficient Shower heads

In these days it is very important and crucial how we use water. As all resources are scarce, the same applies to the water that we use every day for many different purposes. 911 Plumbing Services recommends to minimize the water usage by using  water-saving shower heads which typically range from 1.5 gpm to 2.0 gpm and that  itself represents a 20% or greater water savings.

The Water-Efficient Showerhead by Delta® uses proprietary H2Okinetic Technology® to operate at 1.5 gpm, which delivers 40% less water than a standard showerhead, while providing a satisfying shower experience. It has won numerous awards, including a 2007 Stevie Award, a 2007 silver ADEX award and a 2007 Most Valuable Product (MVP) Award from Building Products magazine. Here, at 911Plumbing Services we are ready to take over your problems and give them an optimal solution. Feel free to give us a call at: 888-959-1911

Water Pressure | Water Pressure Tank

Problems with water pressure are one of the more annoying and undesired things that can go wrong in your house or apartment unit. Showers become running slow and less satisfying, dishes are even more of a chore than usual. These days many people live with these and many other water problems, simply because they aren’t aware of how to fix them (or prevent them in the first place). There are, however, many options available to change your water pressure from bad to normal.

Urban Water Pressure

Most people get their water from a municipal water company. In the main lines underground, the water pressure is very high. Due to friction, this water loses its pressure between the main line and your home. It loses still more pressure between where it enters the home and the faucet it comes out of. The smaller the space is for the water to move through, the more friction there will be. If water has low pressure when it comes out of a faucet, it means that somewhere between the main line and your sink, the water is experiencing too much friction.

Sometimes, the excess friction is caused by pipes being too small in the first place. A pipe that is 1/2 inch in diameter causes significantly more friction than one that has a 3/4-inch or a full inch diameter. If your home is full of 1/2-inch pipes, replacing the ones that are easily accessible with 3/4-inch pipe will make a noticeable difference. Paying a professional to come in and replace all the plumbing with 3/4-inch pipe will make an enormous difference. People building a new home can upgrade from 1/2-inch pipe to 3/4-inch pipe for a relatively low price and save a lot of hassle in the long run.

 

Recent Plumbing Innovations

911-Plumbing-Services-Automated-Urinals

Automated-Urinals

There is a new water-saving and easy to install urinal for public and semipublic applications. It automatically flushes after every use, thanks to an electronic “intelligent” control unit located underneath the hygienically sealed ceramic bowl.Through the sensor, the unit detects the user’s presence and activates a flush as soon as the user moves away. An automatic flush triggers 12 hours after the last use to maintain cleanliness.