Los Angeles Plumbing Services
24/7 Emergency Plumber Los Angeles.

courseTag Archives

Is there a need to replace a Building Trap?

The City’s old houses are cozy or large, but they can be a nightmare for plumbers in Los Angeles. The old-fashioned fixtures and fittings are often very old and have lasted well beyond their intended life cycles.  Modern building codes require plumbers in Los Angeles to implement certain standards, and houses that still contain the original water pipes and drains cause headaches for many homeowners. Building trap replacement is one of the essential tasks for the owners of these homes, because the existence of traps is a major problem.

What is a Building Trap and  Why You Need to Remove It!

The building trap is a U-bend clay pipe that builders would install on the exterior sewer line of houses built before the use of modern plumbing fittings. The purpose of the trap was to stop odorous gases entering the home from the sewer, and it worked by “trapping” a small amount of water in the bend – just like the S-bend under your kitchen sink does. You can check whether your home has a building trap by searching in your front garden for a cast iron “cap” in the shape of a mushroom. It’s usually located on a pipe close to the surface.

Building traps cause a range of plumbing problems for Los Angeles homeowners, such as

  • Blocked drains, caused by the accumulation of waste in the bends of the trap. Because the trap essential consists of two 90-degree elbows, it’s not possible to clear it with modern plumbing equipment.
  • Sewer leaks, caused by cracks in the clay pipe that the U-bend is made from. This allows sewer water to leach out into the surrounding soil, creating a breeding ground for bacteria and odors.
  • Root infestation, which happens when tree roots detect the presence of water within the clay pipe and penetrate to access it. This causes a catchment area for loose debris, which eventually clogs the entire drain.

Modern building codes prohibit the use of building traps, which are no longer available. This means that any renovation of your Los Angeles home needs to include a building trap replacement.

Replacing the Trap

If you find your property has a building trap, check to see whether it’s inside or outside your foundations. Exterior building traps are typically removed by excavating near to the foundation, which is usually fairly simple. Interior traps, however, require lifting of the basement floor. When plumbers in Los Angeles remove building traps, they typically replace them with two-way cleanout that provides access to both directions of the drain. If necessary, they also install a backflow prevention valve to help prevent the sewer from backing up into the home.

If your home is built prior to 1970, contact your local plumber and get an assessment of whether you have a building trap that needs replacement. It costs much less to replace it before you experience problems than it will when you have extensive damages to repair and clean-up costs to add to the process.

Pipe Location

The pipe location in your home is important for proper maintenance and water flow.

Many pipes are located in walls, floors and ceilings and are hard to locate.

If you have no idea where a leak is coming from, you’ll want to call a professional Los Angeles plumber who will have the equipment to locate the pipes in your walls, floors and ceilings.

Without having the proper tools, it can be very difficult to determine where pipes are actually located in your home.

Some older homes may have been built without the use of building codes, and if codes were followed, it’s possible that they were very lax. Today’s homes utilize stricter methods and require an adherence to building codes and statutes.

Our team of Los Angeles Plumbers have tools that will help them locate the pipes in your home. If a pipe has burst, you may waste precious time trying to find the pipe’s location when a professional Los Angeles plumber could find it very quickly.

Once the pipe location has been determined by the Los Angeles plumber, they can discuss the next course of action with you and whether it needs to be fixed in order to avoid future problems.

Rusty Hot Water

It’s alarming to see rusty water coming out of a home faucet.

However, rust in water is a very common problem.There are few places where rusty water could be coming from a one is a pipe itself or from the water heater.

It’s very crucial to determine the exact source of the rust whether its the pipe or water heater, so the situation can be corrected accordingly.

First course of action would be to clean out the water heater to remove any buildup of sediment at the bottom of the heater. This depends on the type of water heater that you have. Second, If the rusty water is coming from the pipes the only way to address the issue would be to do install new pipes.

If you are concerned about the safety of your water due to the amount of rust, it is best to have your water tested.

A professional Los Angeles plumber will be your best guide in addressing and solving this problem.

Choosing An Energy-Efficient Dishwasher

Saving money by using energy-efficient appliances is simple. All a homeowner has to do is make a wise purchasing decision when choosing one and then you can sit back and enjoy the savings for years to come. In the case of your dishwasher, the largest cost of operation is the cost of the electricity used to heat the water that will be used during the washing process. It might surprise you to know that if you have a large family or if you wash dishes often during the course of the day, you might actually save money by using an efficient dishwasher rather than washing them by hand. However, for many people, the question isn’t whether or not to hand wash your dishes, but which dishwasher to purchase. So when looking for our next dishwasher, we need to be looking for a model, make sure to choose one with a great EnergyGuide rating, selectable cycle settings, and a booster heater.

The standard for appliances in the United States is the EnergyGuide ratings established by the Department of Energy. This is the tool that consumers can use in determining which unit is the most efficient in its use of energy. These ratings are attached to the units in the store and are pretty easy to read. But this number alone is not enough for a consumer to make his purchasing decision. Beyond that, the actual usage is equally important. The two main categories of dishwashers are compact and standard. While compact models tend to be labeled as the more energy efficient models, they will hold fewer dishes meaning you may have to use it more often than a standard capacity dishwasher. When deciding which model is right for you and your family, keep the wash size and frequency in mind.

When you are looking at the various models available, look for a model that will allow you to select from multiple cycle settings. When a unit will allow you select shorter cycles, you will use less water to wash your dishes. This results in less hot water being used which means more savings for you. Additionally, you get the satisfaction that comes from knowing you are conserving water as well.

If you want to get the best savings possible, take a look at dishwashers with a booster heater built into it. This clever addition will heat the water as it enters the dishwasher which means that you can lower the temperature setting on your hot water heater and save energy. These will cost a little more but the energy savings will be more than worth it over the long run.

We all have to purchase new appliances over the course of our lives and when we do, it is important for our wallets that we make good choices. One of the most widely used appliances in our homes is the dishwasher and by making an energy-efficient choice, we can save energy and money year after year. So, buy an energy-efficient model and, of course, be sure to always wash full loads.

Dual Flush Toilets

There has been many studies in regards to the Dual flush toilets and whether they do really save water. Dual flush toilets are exactly what they claim to be: toilets that gives the option to choose from two different flushes. First flush has a low volume followed by the second flush with a high volume. These two separate flushes with different volumes help to get rid of the packing more efficiently.

By acquiring a toilet with both a low and high volume flushes, you’ll be able to cut the water your toilet uses by more than half , which will not only save you some  money over the course of the toilet’s lifetime, but it will do some good to the environment.

How Much Difference Can Two Separate Flushes Make?
The answer to this question is impressing. Few studies of dual flush toilets show that using a dual flush system as opposed to a conventional one can reduce water consumption by up to 67%. In fact, the water savings are so substantial that several nations, such as Australia, have passed laws requiring that all new toilets installed are of this variety.

Growing Industry
The double flush idea is relatively new technology to start with (these toilets first hit the international market little more than a decade ago) and recently they are invading into the United States and the rest of North America.  However, a growing concern about the state of our environment, coupled with the widespread occurrences of drought that have plagued many areas of the United States, have prompted a slew of companies to dive into the business, making these pioneering toilets fairly easy to track down for the wise homeowner looking to save money and natural resources.