Los Angeles Plumbing Services
24/7 Emergency Plumber Los Angeles.

buildingTag Archives

What if you can Do it Yourself!

Every homeowner experiences a clogged drain at some point, and it’s usually at the least convenient time. Whether it’s your kitchen sink, bathroom basin or the guest shower, you’ll need to address it as soon as possible. The first step is to determine whether you need a professional to come in and do plumbing repairs in Los Angeles or if you can resolve the problem yourself.

Use an Auger

If the plunger doesn’t work, you’re moving on to step 2. Homeowners who are fairly handy with plumbing tools can try using a cable auger next. To do so, you’ll need to get down under the clogged drain pipe and remove the sink using a pipe wrench. Tip any water and dirt from the trap out into a bucket and check the trap itself to see if that’s where the problem is. If it’s clear, push the cable auger into the section of drain pipe in the wall until it touches debris.

Try a Plunger

That trusty tool of every homeowner and plumber, the plunger is the first thing you should try. Fill the sink part of the way with water to create a vacuum, then position the plunger over the outlet and work it up and down rapidly. If you have a double sink, you’ll need to block the drain outlet for the other side tightly with a wet rag to prevent the blockage bubbling back up. The same applies in a bathroom tub or sink, where you need to plug the overflow outlet before attempting to clean the drain using a plunger.

Use Drain Cleaner

For those who aren’t in possession of an auger, you can try commercial drain cleaner to clear your clogged drain before calling a plumber. These products usually contain a form of acid and can be dangerous if you get them on your person. If you’re going to try this, clear the surrounding area of any people and pets, then follow the instructions for the particular product you’ve purchased.

Typically, you pour the substance into the drain while taking care not to inhale the fumes. Leave it to seep through the mass for 30 to 60 minutes, and it’s a good idea to close the door while you do so because it has a fairly unpleasant odor.  The advantage of this method is that it helps to clear the drain of bacterial pollutants at the same time, which can be a risk to your health.

 

Flush with Water

Regardless of the method you use to clear a clogged drain, it’s useful to follow it with rapidly boiling water poured into the drain. Send several buckets of water down as long as it’s flowing, to flush out any debris that might be left behind. If you made use of any products containing acid, watch out for splash backs and fumes that might be harmful to you or your family.

 

If you have any doubts about your ability to perform these tasks, it’s best to call your local Los Angeles  plumber to deal with the clogged drain.

www.911plumbingservice.com

Is there a need to replace a Building Trap?

The City’s old houses are cozy or large, but they can be a nightmare for plumbers in Los Angeles. The old-fashioned fixtures and fittings are often very old and have lasted well beyond their intended life cycles.  Modern building codes require plumbers in Los Angeles to implement certain standards, and houses that still contain the original water pipes and drains cause headaches for many homeowners. Building trap replacement is one of the essential tasks for the owners of these homes, because the existence of traps is a major problem.

What is a Building Trap and  Why You Need to Remove It!

The building trap is a U-bend clay pipe that builders would install on the exterior sewer line of houses built before the use of modern plumbing fittings. The purpose of the trap was to stop odorous gases entering the home from the sewer, and it worked by “trapping” a small amount of water in the bend – just like the S-bend under your kitchen sink does. You can check whether your home has a building trap by searching in your front garden for a cast iron “cap” in the shape of a mushroom. It’s usually located on a pipe close to the surface.

Building traps cause a range of plumbing problems for Los Angeles homeowners, such as

  • Blocked drains, caused by the accumulation of waste in the bends of the trap. Because the trap essential consists of two 90-degree elbows, it’s not possible to clear it with modern plumbing equipment.
  • Sewer leaks, caused by cracks in the clay pipe that the U-bend is made from. This allows sewer water to leach out into the surrounding soil, creating a breeding ground for bacteria and odors.
  • Root infestation, which happens when tree roots detect the presence of water within the clay pipe and penetrate to access it. This causes a catchment area for loose debris, which eventually clogs the entire drain.

Modern building codes prohibit the use of building traps, which are no longer available. This means that any renovation of your Los Angeles home needs to include a building trap replacement.

Replacing the Trap

If you find your property has a building trap, check to see whether it’s inside or outside your foundations. Exterior building traps are typically removed by excavating near to the foundation, which is usually fairly simple. Interior traps, however, require lifting of the basement floor. When plumbers in Los Angeles remove building traps, they typically replace them with two-way cleanout that provides access to both directions of the drain. If necessary, they also install a backflow prevention valve to help prevent the sewer from backing up into the home.

If your home is built prior to 1970, contact your local plumber and get an assessment of whether you have a building trap that needs replacement. It costs much less to replace it before you experience problems than it will when you have extensive damages to repair and clean-up costs to add to the process.

Hiring a Plumber In Los Angeles

While Los Angelesians are busy enjoying what has so far been a mild winter, many homeowners are planning home renovations in spring. If you’re in this category, you’ll probably need to start sourcing contractors soon for the various aspects of your project, and a qualified plumber is an important one. Hiring a plumber in Los Angeles is fortunately not too difficult, as long as you follow few basic guidelines to make sure you find the right person for the job.

Find a Service Specialist

No matter how good a local Los Angeles plumber is at clearing drains, that’s not going to help you when you need someone to install new kitchen plumbing. As with any other industry, hiring a plumber in Los Angeles depends on finding a contractor with specific experience in the work you want to be done. Using a specialist might cost slightly more than simply hiring the local handyman, but chances are you’ll get a much better quality of work as well.

Where to Start

Begin by searching online for plumbers in your area of  Los Angeles. The GTA is pretty big, and many only work in certain parts of town. Search specifically for those who offer residential plumbing options such as water service installations and drain installations, because this experience is vital to ensure quality work during a renovation. Once you find a list of potential plumbers, you can call them all for quotes on the work you want done.

Check References

It’s not enough to simply go by written testimonials on a plumbing website, because these can easily be created by anyone. When hiring a plumber in Los Angeles for an important project, you need the reassurance that comes with knowing you’ve done your homework before making a selection. It’s essential to verify that the plumber you choose has the skills and experience you need, as well as to find out whether the company is reliable and trustworthy in terms of getting the job done.

Comparing Prices

Plumbers come in all shapes and sizes and so do their prices. It isn’t always easy to compare the prices offered by one contractor with another, because they could use different methods to estimate. When you’re hiring a plumber in Los Angeles, you might find one company quotes separately for labor and parts while another provides an all-inclusive proposal. Some plumbers may prefer you to purchase your choice of fittings, but others believe this part of the job should be left to professionals. Go through every quotation you receive carefully and make sure you understand exactly what is included in each. And remember, cheap isn’t always the best choice!

Avoid DIY Plumbing

Unless you really know what you’re doing, avoid choosing DIY plumbing projects over professional renovations. This is particularly relevant when it comes to skilled trades such as plumbing and electrical, which can have serious repercussions if they are not done correctly. Not only can you end up with a half-finished project because you got too busy halfway, but you could incur huge repair costs that aren’t covered by your insurance. This usually applies to repairs to water damage, particularly if the job was not done by a qualified professional.

There really aren’t any “short cuts” to having your plumbing projects well executed. Hiring a plumber in Los Angeles remains the best and fastest way to get quality work done, and provided you do due diligence it’s also the most cost-effective way. Contact your local plumber 911 Plumbing Services for an estimate on your spring Los Angeles project now – before the season takes off and everyone is busy.

Pipe Location

The pipe location in your home is important for proper maintenance and water flow.

Many pipes are located in walls, floors and ceilings and are hard to locate.

If you have no idea where a leak is coming from, you’ll want to call a professional Los Angeles plumber who will have the equipment to locate the pipes in your walls, floors and ceilings.

Without having the proper tools, it can be very difficult to determine where pipes are actually located in your home.

Some older homes may have been built without the use of building codes, and if codes were followed, it’s possible that they were very lax. Today’s homes utilize stricter methods and require an adherence to building codes and statutes.

Our team of Los Angeles Plumbers have tools that will help them locate the pipes in your home. If a pipe has burst, you may waste precious time trying to find the pipe’s location when a professional Los Angeles plumber could find it very quickly.

Once the pipe location has been determined by the Los Angeles plumber, they can discuss the next course of action with you and whether it needs to be fixed in order to avoid future problems.

Water-Efficient Showerheads

Water-Efficient Shower heads

In these days it is very important and crucial how we use water. As all resources are scarce, the same applies to the water that we use every day for many different purposes. 911 Plumbing Services recommends to minimize the water usage by using  water-saving shower heads which typically range from 1.5 gpm to 2.0 gpm and that  itself represents a 20% or greater water savings.

The Water-Efficient Showerhead by Delta® uses proprietary H2Okinetic Technology® to operate at 1.5 gpm, which delivers 40% less water than a standard showerhead, while providing a satisfying shower experience. It has won numerous awards, including a 2007 Stevie Award, a 2007 silver ADEX award and a 2007 Most Valuable Product (MVP) Award from Building Products magazine. Here, at 911Plumbing Services we are ready to take over your problems and give them an optimal solution. Feel free to give us a call at: 888-959-1911